Marine Water Heaters - Hot Water Cylinders
$1,555.34
(05112)
AquaH - Marine Water Heaters
The AquaH series is designed to withstand the marine environment. It is compact, easy to install and has a modern, attractive look.
Stainless steel water heaters with dual heating as standard - electrical heating and indirect heating based on an second heat source, for example based on the cooling system from the Marine engine or generator set. AquaH is a new innovative series of AISI 316 stainless steel water heaters, with a storage capacity of 22 up to 80 litres (from 5.3 to 19.3 gal.). The heaters are cased in AISI 304 stainless steel and is provided with a sturdy compact plastic end cover which also includes the mounting brackets.
22L (05112) width: 322mm x length: 515mm x height: 334mm
30L (05113) width: 322mm x length: 650mm x height: 334mm
45L (05113J) width: 322mm x length: 910mm x height: 334mm
Electrical heating elements are available in Incoloy at 500 & 1200 Watts allowing hot water production when engine heat is not available but when 230 volts AC is. Delivered with an adjustable safety thermostat for temperature adjustment while on electrical heating.
External casing made of AISI 304 stainless steel
-
Standard with compact plastic integrated mounting brackets
-
Internal surface made of AISI 316L stainless steel
-
Heat insulation polyurethane foam
-
Safety & non return valve set at 6 Bar +/- 0,5 Bar
-
Engine ware fittings 1/2 BSP
AquaH - Marine Water Heaters complies with the requirements of the following European Directives:
- Low Voltage (LVD) Directive 2006/95/EC
-
Electromagnetic Compatibility (EMC) Directive 2004/108/EC
1. Electrical heating elements are 230vac 1200 Watts allowing hot water production
when engine heat is not available.
2. All ATI units are delivered with an adjustable safety thermostat.
3. Pressure relief & non-return valve.
4. Power supply cable as standard.
5. The external casing of this range is made of AISI 304 stainless steel.
6. All units come complete with AISI 304 stainless steel mounting brackets.
7. Easy drain connection.
8. Thanks to the large surface area of the AISL 213L stainless steel heat exchanger/coil,
ATI water heaters have the ability to produce a large output of hot water.
9. Tank made of stainless steel AISI316L, followed by
anti-corrosion treatment of pickling & passivation.
10. For heat insulation, ATI uses closed cell expanded
polyurethane foam (HFC, CFC, HCFC & HFA free).