3 Way Ball Valve Tee Stainless steel
$104.99
$131.23
13414C
This is a 316 Grade Stainless Steel 3 Way Ball Valve.
Sliding locking tab on the handle allows you to leave the sliding tab in the position so the handle if stood on or knocked does not change direction or flow by mistake.
The action created is a Tee in that a supply from the base inlet on turning the handle will supply either left flow or right flow, such as twin fuel or water tanks. A threaded stud conveniently place on the top of the valve can lock the handle from being activated in a particular direction (for example until if that tank is empty), and is screwed in and can be placed at any of four positions.
The female threads are all BSP and suit all our range of plumbing.
A 1/2" bsp unit will accept a 1/2" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 12 or 13mm)
A 3/4" bsp unit will accept a 3/4" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 18 or 20mm)
A 1" bsp unit will accept a 1" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 25mm)
A 1 1/4" bsp unit will accept a 1 1/4" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 32mm)
A 1 1/2" bsp unit will accept a 1 1/2" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 38mm)
A 2" bsp unit will accept a 2" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 50mm)
Ends threaded to suit all our BSP plumbing range. (glass fibre and stainless steel available)