Ball Valve 3 way L type Stainless steel
$106.12
(13414J)
A stainless steel 3 way valve different in configuration to a 3 way tee valve in that it only allows flow from one tank of the other, it never crosses over and allows flow from both tanks at the same time, thus avoiding contamination.
Available in all BSP sizes up to 2".
A 1/2" bsp unit will accept a 1/2" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 12 or 13mm)
A 3/4" bsp unit will accept a 3/4" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 18 or 20mm)
A 1" bsp unit will accept a 1" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 25mm)
A 1 1/4" bsp unit will accept a 1 1/4" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 32mm)
A 1 1/2" bsp unit will accept a 1 1/2" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 38mm)
A 2" bsp unit will accept a 2" internal diameter hose on a hose tail if threaded into the valve. (sometimes referred to as 50mm)
Ends threaded to suit all our BSP plumbing range. (glass fibre and stainless steel available)