Propspeed propeller foul-release coating kits
With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.
Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can’t occur, there will be no corrosion!
The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.
will coat 0.7m2
1 x propeller 33-60cm
120ml Etch primer (96ml part A, 24ml Part B)
80ml Clear coat
will coat 1.7m2,
1 Propeller 66-96 cm,
2 Propellers 36-76cm
300ml Etch primer (240ml part A, 60ml Part B)
200ml Clear coat