Duralac Anti Corrosive Jointing Compound 2 SIZES

Anti-corrosive jointing compound. Inhibits electrolytic corrosion between dissimilar metals. Can be used on masts, winches, batteries, bolts, screws, rivets etc. It is supplied ready for use; it is best applied by brush. Duralac sets to the touch after application but remains tacky for a considerable period. Prevents corrosion between dissimilar metals such as 

British manufactured paste that inhibits electrolytic corrosion between dissimilar metals.

Duralac is a dialectic grease between them if I were

Duralac is supplied ready for use and must not be thinned. It is best applied by brush. When Duralac is applied to metal or other surfaces the volatile solvent evaporates and the compound sets to the touch, but remains tacky for a considerable period. It is important
that the joint should be closed while Duralac is still tacky to ensure that it will flow sufficiently under pressure to close the gaps in the joint. It will harden somewhat if a
thin film is left exposed to the atmosphere for a long period and this will prevent the making of a close joint.

Available in 115ml tube pack (Which is the new Green version (no mercury) ) or 250ml can.

•Between aluminium alloy plates, extrusions and bolts or rivets used in building applications.
•In general engineering applications where dissimilar contact cannot be avoided.
•In vehicle building where aluminium alloy contacts steel.
•For marine application where corrosion is accelerated by brine concentration.
•In close proximity to the sea where a salt laden atmosphere will meet with structures and set up electrolytic cells.
•In aerospace where rivets/bolts are secured into aluminium plates.