Fuel or Wet Exhaust Rubber Hose Tubing (Wire Reinforced )

Rubber Hose Fuel, Wet Exhaust hose with wire reinforcing.

A general purpose petrol, oil & diesel delivery tubing constructed of Nitrile rubber with a high tensile synthetic reinforcement.

Can also be used as a wet exhaust hose, if very tight bends are required we use rubber hose - fuel/wet exhaust -heavy duty (ribbed on the outside), for those craft with a wet exhaust. ( if you search on ribbed exhaust hose that will give it to you.)

The wire reinforcing helps avoid hose collapsing and enables curve, if a greater curve is required use the exhaust hose lloyds as this has the wire reinforcing on the outer part of the hose, so allows a much tighter curve, (search on exhaust hose and you will see this other option). The wire is spirally wound, we have done a cut away so you can see the wire internally.

All sizes internal diameter from 18mm-203mm.

Priced by the metre, but you can order in half metre increments also. (1m, 1.5m, 2m,2.5m, 3.0m, 3.5m 4.0m etc.), simply put a note on your order and we will adjust your docket as it comes through this end.