Carbol Rustcoat Steel over rust isolating Coating
$199.09
(26620)
Recommended use as primer/sealers for marginally prepared steel and over old coatings.
We use it in areas where you can't get at all the rust on the steel to wire brush it off - corners, cavities and joins. It encapsultes and adheres. Comes out in a semi clear finish that allows you to see where and what you are dealing with while treating at the same time. It will need coating at a later stage to provide immediate UV protection.
Ideal for decks and railings where you need to get something on the rust to stop it going further but can not get at it fully or can not get a sand blaster into it where a short time frame is all you have. It remains pretty much clear so you actively see the stopping point of the rust and can be overcoated at a later stage.
Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic character reduces run off, (consistancy of thin golden syrup ensuring that the edges of existing coatings are encapsulated thus reducing undercutting and peeling. It may also be used as a tie-coat for coatings that exceed their “recoat window.” Consult Carboline Technical Services Department for specific recommendations.
Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accept a variety of topcoats.
Features & Benefits
- Universal primer and tie-coat
- Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
- Low stress, highly flexible film
- Extremely high solids
- Low odor
- Contains corrosion inhibitors
- Compatible with a variety of topcoats
- User friendly brush and roller application
- VOC compliant to current AIM regulations