Stop Control Cable and two sizes

For instances where you need to only pull and has an inner flexible core cable that has to pull and then relies on the counter pull at the motor (such as a throttle with a spring) push the lever you are activating back to its original position. Diesel stop control cables / Choke cables / Fire extinguisher activation cables/heater flap controls.

(19102T) - 1.5m  with Twist and lock handle ready for bulkhead mounting. Unique handle action allows you to pull or push and with the twist of a quarter turn (clockwise or counterclockwise) on the tee handle then enables you to lock it in that position - as you would a throttle style.  To release the handle, simply turn back the quarter turn (counter-clockwise or clockwise)  and the handle slides in and out with the cable.

(19102V) - 2.5m    

The 2.5m version simply has an integral tee handle (usually in black or red) is attached to the inner which consists of a flexible core stainless steel wire, (which allows pulling and the lever it is pulling would normally have a spring return).

Can be used as a choke control or anywhere a cable type operation to pull is required. (Often a diesel shut off cable). 

Measurement is from the middle of the bulkhead where the handle is mounted to the end of the inner wire.